M14x1.5 HSS Die Nut HARD WASHER 5/16 Spiral Point or Gun Nose

Spiral Point or Gun Nose taps are mainly used for Machine Tapping of through holes

Overall length 300mm

• Fast dry and recoat times means the job can usually be done in a day

balanced ball-bearing construction for vibration-free performanceautomatic release throttle lever with positive actionbuilt-in regulator for positive speed controlworks with pressure sensitive adhesive back sandpaperspindle/thread size : 5/16"-24free speed (rpm) : 10

System Case 4: 295mm x 395mm x 315mm

M14x1.5 HSS Die Nut HARD WASHER 5/16 Spiral Point or Gun NoseM14 x 1. 5 HSS Die Nut Die nuts are suitable for repairing damaged or crossed threads or clearing swarf from threads. When using a die nut it is not necessary to apply the same level of precise initial alignment required to form a new thread (i. e. with a die) as the nut will follow the existing threads. They are supplied as hexagon allowing them to be turned by a standard spanner or adjustable wrench without the need for a die stock.