Metabo SDS + 4-S Bit 22X400 WIRE7 TEFXV28 | Teng Socket and

TEFXV28 | Teng Socket and Screwdriver Set Insul 28pcs • Approved for live working up to 1 000 volts • Integrated protective insulation with two colours clearly indicate if there is any damage • Tools are hold in place using three colour pre-cut high-density EVA foam clearly showing where each tool belongs • Design to fit exactly in the TengTools service cases • Design and manufactured to IEC60900 (EN60900) • Organised in a foam inlay module size 3 (FOAM3) Contents • MV380506 Socket Insulated 3/8 inch Drive 6mm • MV380507 Socket Insulated 3/8 inch Drive 7mm • MV380508 Socket Insulated 3/8 inch Drive 8mm • MV380509 Socket Insulated 3/8 inch Drive 9mm • MV380510 Socket Insulated 3/8 inch Drive 10mm • MV380511 Socket Insulated 3/8 inch Drive 11mm • MV380512 Socket Insulated 3/8 inch Drive 12mm • MV380513 Socket Insulated 3/8 inch Drive 13mm • MV380514 Socket Insulated 3/8 inch Drive 14mm • MV380515 Socket Insulated 3/8 inch Drive 15mm • MV380516 Socket Insulated 3/8 inch Drive 16mm • MV380517 Socket Insulated 3/8 inch Drive 17mm • MV380518 Socket Insulated 3/8 inch Drive 18mm • MV380519 Socket Insulated 3/8 inch Drive 19mm • MV380520 Socket Insulated 3/8 inch Drive 20mm • MV3800 Ratchet Insulated 3/8 inch Drive • MV380020 Extension Bar Insulated 3/8 in Dr 3 in • MV380021 Extension Bar Insulated 3/8 in Dr 6 in • MDV700 Screwdriver Large Blade Handle • MDV710 Screwdriver Small Blade Handle • MDV731 Screwdriver Interchangeable 3mm Flat • MDV732 Screwdriver Interchangeable 4mm Slim • MDV733 Screwdriver Interchangeable 5

- The polish or mirror polish (only finish 2) together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools

Includes: (1) Coarse Diamond Plate

fish hooks

Adaptors are threaded 1/4” NPT (F)

Metabo SDS + 4-S Bit 22X400 WIRE7 TEFXV28 | Teng Socket andMetabo SDS + 4 S Bit 22X400 631707000 Intelligent geometry with its uncompromised quality of detail ensures a long service life, precise drill holes and maximum quiet running even on the toughest loads Highest Level of Safety: Optimum symmetrical head geometry with 4 full carbide cutters, which do not catch when encountering reinforcing Up to 16 mm: Innovative, welded full carbide head for maximum tool life and larger dust outputs for highest drill