BSPT Bottoming HSS Tap by Bordo Size:1/4" x 19TPI Cutting height adjustment range: 20-75mm

Cutting height adjustment range: 20-75mm

Specifications: Strokes in idle: 0 - 3000 rpm

4mm Diameter - 1/2" Shank

(1) M18 FUEL™ ONE-KEY™ 13mm Hameer Drill/Driver (Tool Only)

Fully automatic tuning

BSPT Bottoming HSS Tap by Bordo Size:1/4" x 19TPI Cutting height adjustment range: 20-75mmAbout this product: HSS BSPT Bottoming Hand and Machine Tap. British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form a symmetrical V thread with an angle of 55. BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread. The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when