Doepfer A-101-1 Vactrol Multitype Filter konig-meyer A Rotate CV jack re-assigns

A Rotate CV jack re-assigns the multiplication number of each jack

due to their regular popularity

Building on the success of our K Series

The famous original MS20 included two filters: a 12 dB lowpass and a 6dB high pass filter connected in series both with a very special design (the MS20 highpass if very often described as 12dB high pass

the Lite edition of which is included in the box and integrates with Impulse 25’s controls to provide:

Doepfer A-101-1 Vactrol Multitype Filter konig-meyer A Rotate CV jack re-assignsThis is the first vactrol based module in the A 100 system. A vactrol is a combination of a light depending resistor (LDR) and a LED (light emitting diode) both put into a small light proof case. For more general details about vactrols please look at the Vactrol Basics page information. Increasing the LED brightness causes a decrease of the LDR resistance (e. g. the light controlled voltage module A 179 is an application of a LDR). This effect can be